Installation:
The MultiProx reader directly replaces existing Schlage/Westinghouse access control equipment without replacing any existing cabling.
Cost effective:
The MultiProx reader is quick and easy to install. Meet expanding card requirements with the introduction of low-cost, HID proximity cards to existing Schlage access cards populations.
Mounting:
The MultiProx reader directly replaces the existing Schlage sensor. No modifications to existing mounting hardware, mounting holes and cable locations are required.
Audiovisual indication:
When a proximity card is presented to the reader, the red LED flashes green and the beeper sounds. The multicolor LED and beeper also can be controlled individually by the host system.
Indoor/outdoor design:
The MultiProx reader is sealed in a rugged, weatherized polycarbonate enclosure designed to withstand harsh environments as well as provide a high degree of vandal resistance.
Easily interfaced:
The MultiProx reader interfaces with all existing Wiegand protocol access control systems. The facility code and card numbers of the Schlage cards are represented in a 26-bit or 32-bit Wiegand format.
Warranty:
All MultiProx reader components are warranted against defects in materials and workmanship for life from date of shipment. (See complete warranty policy for details.) ]
Typical Maximum Read Range*
ProxCard® II card up to 3" (7.5 cm)
ISOProx® II card up to 2" (5 cm)
Schlage card up to 2" (5 cm)
Dimensions
7.5" x 7.5" x 0.8" (19 x 19 x 2 cm )
Weight
15 oz. (426 gm)
Temperature
Operating -40° to 150° F (-40? to 65? C)
Storage -40° to 185° F (-40° to 85° C)
Operating Humidity
5-95% relative humidity noncondensing over specified temperature
Power Requirements
50 mA @ 24VDC (Powered by the controller)
*Depending on local installation conditions.