Reva Systems  

      |  About  Us   |  News  |  Product & Service  |  Applications  |  Contact Us  |  Back to rfidglobal    
     
        Home rfidglobal > Products & Services > RFID readers (handheld) > IP-X Dual Frequency Mobile RW Reader
IP-X Dual Frequency Mobile RW Reader - RFID readers (handheld)

IP-X Dual Frequency Mobile RW Reader


Company : IPICO
Dimensions(cm) : 180 x 160 x 95 (mm LxHxW)
Product Origin : Canada

Parameters
Weight(kg) : 620g including battery
Supply Voltage(V) : 7.2V Lithium Polymer rechargeable battery
Frequency(kHz) : <135KHz
Certification : FCC , FDA , UL , CE
Standard/Protoccal : Others
Communication Interface : Wireless Internet
Read Range(cm) : 30
Operating Temp Range(°C) : -20 --- 80


Product Information

The IP-X Dual Frequency Mobile reader consists of an integrated set of antennas, RF unit, and battery, and is connected
by a BluetoothTM (BT) link to any BT-enabled PDA, PC, DIMI-SA, or other control/storage device. The complete reader is
integrated into an ergonomically shaped ABS housing. When the trigger switch is activated, any tags in the field will be
read, and the reader will transmit their codes (if valid) via the BT link to the host controller. BluetoothTM Class 1 is specified
with a typical range > 10m, and 30m line of sight.

IPICO’s Dual Frequency products offer the ability to operate tags in lossy media, with a high data rate not normally possible
in Low Frequency systems. The technology allows relatively long read ranges to be achieved when tags are attached to or
embedded in liquids, biological materials, e.g. food-stuffs, trees, animals. The Mobile Reader provides a useful addition to
the Short, Medium and Long range DF reader families, allowing convenient recording of tags to be deployed in larger
applications e.g. access control, people-spotting, underground conduit marking (pipes, ducts).

This reader allows the user to do remote registration and inventory control, and process the data in real time as long as it
remains in BT range of the host controller’s BT interface.

Key Features
§ Complies with USA, European, Australian and RSA spectrum regulations
§ Robust anti-collision protocol
§ High tag bit rate : 128 kbit/sec
§ Tag ID codes are CRC-validated.
§ Code repeats are suppressed if operated in “Continuous trigger” mode (only one code per tag is sent to the host)
§ Range (Credit Card Tag): 200 – 300 mm
§ Ergonomic, light-weight handheld design
§ Uses rechargeable battery pack which lasts for typically 7000 reads in triggered mode
§ Bi-directional communications with host controller using BluetoothTM (Class 1) RF interface
§ Trigger switch for reading; ON/OFF power switch; Auto SWITCH OFF
§ LED status indicators
§ Audible beep indicates valid code received
§ Reads EM 4322, EM4522 (128 kbit/s) tags; Writes to EM4522 tags
§ High impact ABS housing


Attachment : download


  Contact Us
    Add : 100 Apollo Drive Chelmsford, MA 01824 USA
    P.C. :
    Tel : 978.244.0010
    Fax :
    URL : http://www.revasystems.com
    Send a message to the vendor
 



Our products
IP-X Dual Frequency Medium Range Reader
Short Range Dual Frequency Reader

Related Products
  • RFID Hand-held Terminal
  • CF Card UHF Interrogator
  • Copyright(C)2007 Reva Systems is All Rights Reserved.Supported by rfidglobal