Location:  Home > RFID Product > RFID transponders(special form) > RFID transponders(special form) > IP-X Read-Only Dual Frequency RFID Tag Small Linear Type

IP-X Read-Only Dual Frequency RFID Tag Small Linear Type

IP-X Read-Only Dual Frequency RFID Tag Small Linear Type
  • Category:  RFID transponders(special form)
  • Place of Origin:  Canada
  • Model No:  
  • Company Info

  • suppliers:  IPICO Inc.
  • Date Joined:  2007-08-27
  • Country/Territory:  Canada
  • Business Type:  Manufacturer
  • Number of Employees:   People
  • Contact this Member:  +1 905 631 6310
  • Click here to leave message
  • This Product got 0 messages so far.
  • Detailed Product Description

  • IPICO’s Dual Frequency RFID Technology uses the same IP-X multi-read protocol as its UHF products, but the low
    frequencies used, (125kHz power-up and 6.8MHz return signal), can penetrate through “lossy” media without the problems
    of tag antenna detuning, and the high attenuation encountered with UHF systems. Because of the high tag transmit carrier
    frequency, high data rates are achievable (up to 256kbit/sec), resulting in fast reading of multiple tags in the beam. Dual
    Frequency technology allows for longer ranges to be achieved than single frequency low frequency technologies, e.g. 125
    kHz or 13.56 MHz. This is mainly because the tag data carrier frequency (6.8 MHz) is much higher than the power-up
    frequency (125 kHz). The DF Small Linear tag can operate when affixed to thin metal surfaces. 

    Applications 

    § Short range applications, e.g. access control and asset control
    § Tracking of instruments
    § Tracking of mine Self Contained Self Rescue packs
    § Tracking of foodstuffs, in bins or bags
    § Mining tracers (ore, diamonds)
    § Electronic labelling of RF-unfriendly materials (rock samples, trees, etc)
    § Any situation where the tag needs to be embedded in, or affixed to a lossy material, even marine applications 

    Chipset 

    § X3 / EM4322 

    Tag Construction 

    § Consists of a chip module attached to 125 kHz and 6.8 MHz coil antennas, potted into a 4 mm thick PVC housing.

    Key Features

    § Low cost single chip solution
    § Compliant with USA, European, Australian, and RSA spectrum allocations
    § Dual frequency (Transmit 125kHz / Receive 6.8MHz)
    § Robust Anti-collision protocol (up to 120 tags read simultaneously)
    § Fast moving tags (8 m/sec) can reliably be read
    § Can be used in mixed populations of Read/Write and Read-Only Dual Frequency iPX RFID tags
    § Factory programmed 64 bit ID number
    § High tag transmission rate (128 kbits/sec)
    § High tag read rate – up to 155 tags/sec
    § Passive – no battery
    § -30 to +70 OC operating temperature range
    § Adhesively mounted to surface.
    § Waterproof
    § Can be mounted on thin metal surface
    § Solid and robust.



    Attachment : download

  • Application

Related Products


About Us | Terms of Use | My Office | Link | Contact us | Privacy

TEL: +86 755 81650071   Fax: +86 755 86227110  Email:rfidglobal.org@gmail.com  MSN: rfidservice@hotmail.com
Copyright 2007 www.rfidglobal.org 粤ICP备08028578号 All Rights Reserved