The Registration Reader is used mainly for testing UHF tags and recording their factory-set 64-bit ID codes. It is connected via
an RS232 cable to a PC or other device, which controls when the RF unit transmits, and records tag ID data. While the RF unit
is transmitting it receives codes from in-range tags, and the decoder (the data processing part of the RF unit) filters out code
repeats, so that only one occurrence of each code is output on the RS232 link. Normally one tag at a time is recorded.
Depending on the PC’s application software, each tag code may be time stamped and linked to other information (e.g. a name) before being stored or sent to another application.
The Reader uses version C of IPICO’s “Mini Radio Frequency Unit” range, which features two integrated patch antennas. The transmit antenna radiates approximately 40 mW EIRP. Power supply is 12V from a separate mains operated PSU supplied with the Reader.
The reader is supplied with both Ethernet and RS232 connections for control and data output.
Key Features
§ Available for USA, European, AUS and RSA spectrum allocations
§ RF power output : 40 mW EIRP fixed
§ Read/Write IP-X4 (EM4422), -X7 (EM4432) tags; Read EM4022, and all IP-X tags (EM4222, 4422, 4232, 4432, 4444)
§ X4TTO compliant for read/write
§ Write characteristics: speed =16 kb/sec, modulation = -36 dBc
§ Real time clock (RTC)
§ IP-54 enclosure and connectors
§ Software, hardware and diagnostics control
§ Built-in test and diagnostics
§ Valid ID & status outputs
§ Bi-colour LED indicator indicates RF ON/OFF, valid code received, slow flash = “Reader Ready”
§ Optional TX On/Off control input
§ Ethernet & RS232 connections for data & control
Attachment : download